CF-705DMS

Semi-Auto Double Miter Cutting Metal Band Saw

The Big Stone CF-705DMS Double-Column Semi-Automatic Double Miter Band Saw (Double-Column Linear Guideway Gantry Type) is engineered and manufactured at Big Stone's main facility in Hsinchu, Taiwan (4,650 m² / ~50,052 sq ft / 1,406 坪). Featuring an extra-wide cutting capacity of 440 × 700 mm (17.3" × 27.6") for structural profiles and Ø450 mm (Ø17. 7") for solid rounds, it executes precision bi-directional mitering from Left 90°–30° to Right 90°–30°. Built with an ultra-rigid double-column linear guideway elevation frame, 0.1° digital angle readout, and 5° blade inclination geometry, heavy 6m to 12m structural H-beams, wide channels, and large tubes are mitered with no material turning and no workpiece flipping, eliminating overhead crane turning hazards and cutting shop cycle times by over 60%.

Why Do Heavy Steel Fabricators Specify the CF-705DMS for Large H-Beam Bi-Directional Mitering?

Twin-Column Linear Guideway Vibration Dampening: The heavy-duty dual columns paired with precision linear guideways evenly distribute cutting downfeed thrust. This eliminates the blade flutter, chatter, and wavy surfaces typical of scissor-type saws across 700mm wide beams, delivering true perpendicular cuts for zero-gap welding assembly.

Constant Fixed Vise Pivot Datum: The saw bow swivels around a pivot aligned precisely with the fixed vise jaw and cutting line intersection. The workpiece zero reference point remains constant whether mitering Left 30°, 45°, or Right 30°, completely eliminating repetitive length compensation calculations and tool realignment.

440 × 700 mm (17.3" × 27.6") Capacity Double-Column Linear Guideway Gantry Left 30° to Right 30° Dual Miter 0.1° Precision Digital Readout 5° Blade Inclination Design 3.75 kW (5.0 HP) Inverter Drive No Workpiece Flipping
Features

What Core Engineering Features Allow the CF-705DMS to Solve Extra-Large Structural Sawing Bottlenecks?

Engineered for large building steel structures, heavy machine bases, bridge fabricators, and large structural pipe processing, the CF-705DMS integrates heavy cast rigidity with digital angle precision:

Bi-Directional 90°–30° Wide Miter

Supports swiveling from Left 90°–30° to Right 90°–30°. Multi-ton 12m structural steel beams pass straight through with zero material turning or workpiece flipping, saving over 60% handling time.

0.1° Real-Time Digital Angle Readout

Equipped with an industrial rotary encoder and high-contrast digital display, providing instant 0.1° readings to eliminate manual scale parallax errors and ensure repeatable miter cuts.

Fixed Vise Jaw Pivot Datum

The rotation pivot aligns precisely with the fixed vise jaw datum line. Swiveling angles does not alter the material stop length, completely eliminating repetitive tool realignment.

5° Blade Inclination Geometry

The 5° initial blade tilt allows gradual tooth entry across wide H-beam flanges and flat bars, reducing initial tooth shock load and extending blade life by over 35%.

Double-Column Linear Guideway Gantry

Heavy steel twin columns guided by precision linear rails provide rigid, vibration-free downfeed, ensuring superior squareness without wavy cut surfaces across large 700mm profiles.

Linked Guide Arm Positioning

The movable guide arm adjusts along with workpiece width to maintain optimal carbide guide support span, maximizing rigidity and dampening blade vibration during heavy slicing.

CF-705DMS Technical Specifications Matrix (Dual Units)

Official Big Stone factory catalog standards. All machines undergo 100% geometric alignment and load cutting verification prior to shipment:

Specification Parameter CF-705DMS (Double-Column Semi-Auto Double Miter Band Saw)
Cutting Capacity
(Dual Units)
● 90° Solid Round Bar Ø450 mm (Ø17.7")
■ 90° Rectangular / H-Beam (H × W) 440 × 700 mm (17.3" × 27.6")
◢ 45° Left Miter (H × W) 440 × 450 mm (17.3" × 17.7")
◢ 30° Left Miter (H × W) 440 × 270 mm (17.3" × 10.6")
◣ 45° Right Miter (H × W) 440 × 450 mm (17.3" × 17.7")
◣ 30° Right Miter (H × W) 440 × 290 mm (17.3" × 11.4")
Motor Output
(kW / HP)
Main Blade Motor 3.75 kW (5.0 HP) Inverter Variable Drive
Hydraulic System Motor 0.75 kW (1.0 HP)
Coolant Pump Motor 0.1 kW (0.13 HP / 1/8 HP)
Wire Chip Brush Motor 0.1 kW (0.13 HP / 1/8 HP)
Blade Dimensions (L × W × T) 5660 × 41 × 1.3 mm (222.8" × 1.61" × 0.051")
Blade Speed Range (Variable) 20–90 m/min (66–295 FPM) Inverter Drive
Hydraulic Vise Clamping Range 60–720 mm (2.4"–28.3") Full-Stroke Hydraulic
Work Table Bed Height 730 mm (28.7")
Machine Dimensions
(L × W × H)
Length 1600 mm (63.0")
Width 3000 mm (118.1")
Height 2300 mm (90.6")
Net Machine Weight approx. 2,500 kg (5,512 lbs) Heavy Cast Gantry Base
Roller Table Configuration Standard DMS machines include NO infeed and NO outfeed roller tables. Miter auxiliary roller tables are optional accessories (modular 1m, 2m, 3m, 5m non-motorized passive idle roller design).

Standard Factory Equipment

  • Variable Frequency Blade Inverter (20–90 m/min / 66–295 FPM)
  • Hydraulic Automatic Blade Tension Control System
  • High-Precision 0.1° Digital Angle Display Unit
  • Precision Laser Line Alignment Projector
  • Hydraulic Vise Pressure Relief Valve (Thin-Wall Structural Tube Protection)
  • High-Volume Flood Coolant System
  • 1x Bi-Metal Blade (5660 × 41 × 1.3 mm) & Dedicated Toolkit

Optional Upgrades & Accessories

  • Micro-Mist MQL Clean Lubrication Unit (Hydraulic Spray Mist)
  • Hydraulic Top Nesting Clamps (Bundle / Angle Iron Sawing)
  • Extended Height Vise Jaws (Tall Heavy Material Stacks)
  • 1m / 2m / 3m / 5m Heavy-Duty Idle Roller Tables (Non-Motorized)
  • Digital Length Stop Stopper & Passive Auxiliary Stands

How to Operate the CF-705DMS for Rapid 45° Dual-Miter Cutting in 3 Steps

Standard shop operational procedure on the CF-705DMS utilizing digital angle setting, hydraulic clamping, and semi-auto cycling:

  1. 1

    Step 1 – Set Miter Angle via 0.1° Digital Display

    Release the hydraulic angle locking lever, rotate the saw bow to the target angle (Left 90°–30° or Right 90°–30°), observe the 0.1° digital readout, and relock the lever.

  2. 2

    Step 2 – Position Workpiece & Clamp Hydraulic Vise

    Advance the H-beam against the fixed vise jaw datum (cutting origin remains fixed), verify cut length with laser projector, and engage full-stroke hydraulic clamping.

  3. 3

    Step 3 – Set Blade Speed & Initiate Semi-Auto Cycle

    Adjust blade speed (20–90 m/min / 66–295 FPM) according to steel alloy and press Cycle Start. The saw bow descends, severs the material, stops, and rapid-elevates to preset clearance height.

Specification

How to Perform 4-Phase Preventive Maintenance on the CF-705DMS for 10-Year Precision

Big Stone official four-phase preventive maintenance protocol for dual-column bandsaws:

  1. 1

    Daily Routine

    Verify hydraulic blade tension gauge rests in the green zone before startup, inspect tungsten carbide blade guides and wire chip brush, and replenish coolant levels.

  2. 2

    Weekly Inspection

    Clear metal chips from linear guideway surfaces and turntable grooves, inspect central lubrication oil reservoir, and refill slideway lubricant as needed.

  3. 3

    Monthly Calibration

    Verify 0.1° digital angle readout accuracy against master angle blocks at 0° and 45°, inspect vise gib clearance, and apply fresh grease.

  4. 4

    Quarterly Maintenance

    Replace hydraulic fluid, clean coolant reservoir filtration screens, and inspect drive belt tension and electrical terminal tightness.

Verified Field Customer Reviews ★ Avg 5.0 / 5.0 (Based on Structural Steel & Heavy Metal Fabricator Audits)

Michael Brooks | Heavy Structural Fabrication Plant Manager |
★★★★★

Large H-Beam Bi-Directional Mitering with No Workpiece Flipping Boosts Efficiency

"The CF-705DMS transformed our structural steel processing. Opposite angle cuts are spot-on every time, and the hydraulic vise locks 700mm wide beams solidly. Because long beams feed straight through with no material turning, we eliminated crane flipping risks. Automatic bow return saves over 30% cycle time, and the 2.5-ton gantry frame runs without vibration."

Sarah Nguyen | Metal Processing Center Operations Director |
★★★★★

Intuitive Operation, Outstanding Dual-Column Rigidity, and Flawless Perpendicularity

"Semi-automatic operation fits our production batching perfectly. The dual-column gantry construction makes the saw frame rock-solid, and blade changes are swift. We cut aluminum, stainless, and thick carbon steel profiles; cut squareness and edge quality are superb. Direct factory support and rapid consultation from Big Stone were top-tier."

CF-705DMS Double-Column Double Miter Band Saw FAQ

1. What are the maximum cutting capacities of the CF-705DMS across different angles?
At 90° straight cuts: 440 × 700 mm (17.3" × 27.6") rectangular / H-beam and Ø450 mm (Ø17.7") solid round bar; Left and Right 45° miter cuts: 440 × 450 mm (17.3" × 17.7"); Left 30° miter cut: 440 × 270 mm (17.3" × 10.6"); Right 30° miter cut: 440 × 290 mm (17.3" × 11.4").
2. What is the bi-directional mitering range and readout precision of the CF-705DMS?
The CF-705DMS supports swiveling from Left 90° to 30° and Right 90° to 30° across wide angles, equipped with a high-resolution 0.1° digital angle display for instant and accurate miter readings.
3. What structural design guarantees stability during large structural beam cutting?
The machine incorporates an ultra-rigid double-column steel gantry frame paired with dual precision linear guideways, eliminating downfeed deflection and cantilever resonance to maintain true squareness during heavy slicing.
4. What is the practical advantage of the 5° built-in blade inclination?
The 5° canted blade geometry ensures the teeth enter wide beam horizontal flanges and flat plates at an inclined angle, significantly reducing initial tooth shock impact and extending blade life by over 35%.
5. Are infeed and outfeed roller tables included as standard with DMS series machines?
No. Standard CF-705DMS machines include NO infeed and NO outfeed roller tables. Infeed and outfeed miter auxiliary tables are optional accessories (strictly non-motorized passive idle roller design), available in modular 1m, 2m, 3m, and 5m lengths.
6. How does the linked guide arm adjustment mechanism operate?
The movable blade guide arm adjusts quickly to workpiece width, keeping carbide guide pads at the closest optimal span to the material to deliver maximum blade support and suppress harmonic vibration.

Original Factory Manufacturing & Quality Standards: Big Stone Machinery Co., Ltd. is founded and based in Hsinchu, Taiwan (Plant area: 4,650 m² / ~50,052 sq ft / 1,406 坪). All metal band saws comply with CE European Safety Standards, verified by ISO 14064-1:2018 greenhouse gas inventory standards, official Member of the Taiwan Association of Machinery Industry (TAMI), with 17 consecutive editions of TIMTOS exhibition authority. Machines support ASTM A36/A572, JIS SS400/SM490, and EN10025 S235/S355 structural steel sawing.
• Direct Factory Contact: +886-3-5931688 | Email: info@bigstone.com.tw | Book Material Test Cut & Request Quotations

Trade Information
  • Country of Origin : Taiwan
  • Main Export Markets : all over the world
  • Payment Details :
  • Payment Terms : T/T
  • Minimum Order : 1 Units
    Order Quantity Limit : 1 Units
  • Others : bandsaw machine
  • Delivery Details :
  • Lead Time : 60 Days
  • FOB Port : TWKEE

Inquiry

View Picture
Selected Items
Estimate Purchasing Quantity
Estimate Purchasing Schedule
Semi-Auto Double Miter Cutting Metal Band Saw
The Big Stone CF-705DMS Double-Column Semi-Automatic Double Miter Band Saw (Double-Column Linear Guideway Gantry Type) is ...
Minimum Order 1 Units
Order Quantity Limit 1 Units
Information of Contact Person
Company Information

(Please enter full telephone number, including Country code, Area code.)

(Please enter full telephone number, including Country code, Area code.)

Others
Allowed file types: .pdf, .jpg, .jpeg, .png, .doc, .docx, .xls, .xlsx, .zip, Max file size: 5 MB.

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.